|| People || Research || News || Publications || Links ||
 
 

 

 
Dr. Khan Muhammad Brohi

Dr. Khanj Muhammad Brohi

Professor
Department of Mechanical Engineering,
Mehran University of Engineering & Technology, Jamshoro, Pakistan

Tel# +92 222 2771182
Fax: +92 222 772196
Email: [email protected]

Research Interests: EIA & SEA in Road Networks, Implementation of Environmental Standards, Implementation of ISO 14000 and OHSAS 18001, Air and Noise Pollution.

Qualifications

  • Ph.D. (Mechanical), Sussex University, U.K., 1995

Employment and Job Experience

  • Professor (BPS-21)  5th January, 2007
    Mehran University of Engineering &  Technology, Jamshoro, Sindh

  • Professor (BPS-20) November, 2006 Mehran University of Engineering & Technology, Jamshoro, Sindh

  • Associate professor (BPS-19) July, 2004 - November, 2006  Mehran University of Engineering &  Technology, Jamshoro, Sindh

  • Assistant Professor (BPS-18)  March, 1996 - July, 2004
    Mehran University of Engineering &  Technology, Jamshoro, Sindh 

  • Lecturer (BPS-17)  September, 1988 – March, 1996 Mehran University of Engineering & Technology, Jamshoro, Sindh.

Research Papers and Publications

  • Khan Muhammad Brohi, Muhammad Aslam Uqali, Mujeebuddin Memon, MUET, Jamshoro, Pakistan (May 4-6, 2009), “Implementation of Environmental Policies for New Road Network of Pakistan”, presented in 1st International Conference on Energy, Environment & Sustainable Development for Growing Economies (EESD2009), at Mehran University of Engineering & Technology Jamshoro Pakistan.  

  • Khursheed A. Amur, Dost A. Khuwaja, Khan Muhammad Brohi, Mumtaz A. Halepoto, Shabir H. Kharo, EEMC, Karachi, Pakistan (May 4-6, 2009), “Environmental & Social Impact: Analysis of KPT commercial office building, Karachi”, presented in 1st International Conference on Energy, Environment & Sustainable Development for Growing Economies (EESD2009), at Mehran University of Engineering & Technology Jamshoro Pakistan. 

  • M Hanif Memon, Zeeshan Khatri and Khan M Brohi, MUET, Jamshoro, Pakistan (May 4-6, 2009), “Textile Effluents: Recycling and Reuse”, presented in 1st International Conference on Energy, Environment & Sustainable Development for Growing Economies (EESD2009), at Mehran University of Engineering & Technology Jamshoro Pakistan. 

  • Mahar Rasool Bux,  Brohi Khan M, Nie YongFeng, Tsinghua University Beijing, China (May 4-6, 2009), “Two Stage Bioreactor: Sustainable Landfill”, presented in 1st International Conference of Energy, Environment & Sustainable Development for Growing Economies (EESD2009), at Mehran University of Engineering & Technology Jamshoro Pakistan. 

  • Zeeshan Khatri, M. Hanif Memon, Prof. Khan M. Brohi, MUET, Jamshoro, Pakistan (May 4-6, 2009), “Cold Pad-batch: Environmentally Responsible dye application”, presented in 1st International Conference on Energy, Environment & Sustainable Development for Growing Economies (EESD2009), at Mehran University of Engineering & Technology Jamshoro Pakistan. 

  • Shamshad Ali, Zeeshan Khatri, Khan M. Brohi, MUET, Jamshoro, Pakistan (May 4-6, 2009), “Economic and Environment Friendly Reactive Dyeing on Thermosol Machine”, presented in 1st International Conference on Energy, Environment & Sustainable Development for Growing Economies (EESD2009), at Mehran University of Engineering & Technology Jamshoro Pakistan. 

  • Dr. Khan Muhammad Brohi (4-8 February, 2007), “Renewable Fuel Alternatives for Transport Sector in Pakistan”, presented in International Conference of Renewable Energy for Sustainable Development in the Asia Pacific Region, at the Esplanade Hotel, Fremantle, Perth, Western Australia.

  • Takaaki OKUDA and BROHI Khan Muhammad (27th – 29th May 2003), “Economic and Environmental Impact Analysis of New Road Network Project, connecting the Metropolitan Cities in the Inland with Port city of Karachi in Pakistan”, Accepted for 8th International Conference on Computers in Urban Planning and Urban Management Conference (CUPUM'03) in Sendai, Japan.

  • Takaaki OKUDA and BROHI Khan Mohammad (September 2002), “Applied General Equilibrium Analysis on Economic and environmental Impacts of New Road Transport Network in Pakistan”, presented in Fourth International Conference of European Trade Study Group, Kiel Germany

  • BROHI Khan Mohammad and Takaaki OKUDA, (August 2002), “Strategic Environmental Assessment in Developing Countries Case study of Pakistan”, proceeding of the Fourth International Summer Symposium Kyoto, pp. 371-374.

  • Tatsuya Yashiki, Takaaki Okuda and K. M Brohi, (October 2000), “An Impact Analysis of Policies for Reducing CO2 Emission in Road Network”, proceeding of conference Society for Environmental Economics and Policy Studies (Japan), pp. 172-173.

International Journal Publications

  • Takaaki OKUDA and BROHI Khan Mohammad (October 2001), “Applied General Equilibrium Analysis on Economic Impacts of New Road Transport Network in Pakistan” Journal of Eastern Asia Society for Transportation Studies (EASTS 01, Hanoi-Vietnam) Vol. 4, No.6, pp. 17-32.

  • BROHI Khan Mohammad and Takaaki OKUDA (October 2003), “Introduce Strategic Environmental Assessment (SEA) in the New Road Network in Pakistan for proper Decision-Making Policies” Journal of Eastern Asia Society for Transportation Studies (EASTS 03, Fukuoka- JAPAN) Vol. 05, page No.3111-3125.

National Journal Publications

  • Dr. Khan Muhammad Brohi and Zeeshan Khatri (Jan-June 2008): “Environmental Friendly Textiles – To Sustainability” Quid-e-Awam University Research Journal of Engineering, Science and Technology, Pakistan.    

  • Bashir Ahmed Leghari, Khan Muhammad Brohi, and A.S Qureshi (Jan – Dec 2005):Design & Optimization of Life Saving Safety Valve for Gas Appliances” Quid-e-Awam University Research Journal of Engineering, Science and Technology, Pakistan Vol. 6, No.1&2, pp 65-72.

  • Abdul Sami Qureshi, Ghous Bux Khaskheli and Khan Muhammad BROHI (October-2005): “Road Accident Analysis of N-5 South section-1 Karachi-Hala” Mehran University Research Journal of Engineering, and Technology, Pakistan Vol. 24, No.4, pp 387-396.

  • N. A. Shaikh, Dr. S. Naveed, Z. Nawaz, Dr. K. M. BROHI and K. Sagheer (April-June 2005): “Chemical Analysis for Waste Minimization in paint Industries” A Quarterly Journal of the Pakistan Engineering Congress Vol. 42, No.5, pp 51-56.

  • Khan Muhammad BROHI, Saleem Raza SAMO and A.S Qureshi (July – Dec 2004):Application of Strategic Environmental Assessment (SEA) for Proper Implement of Policy Decision Making in New Road Network of Pakistan” Quid-e-Awam University Research Journal of Engineering, Science and Technology, Pakistan Vol. 5, No.2, pp 71-76.

  • Khan Muhammad BROHI, Saleem Raza SAMO and M.A. Akhund, (Jan – June 2004):The Effect of Building Regulations and Energy Conversation Measures in Domestic Sector on National Energy Consumption” Quid-e-Awam University Research Journal of Engineering, Science and Technology, Pakistan Vol. 5, No.1, pp 65-72.

  • K.M BROHI, T. OKUDA and S.R. SAMO (April - 2004), “Importance of Input-Output Table for Estimation of CO2 Emission from Production Sectors of Pakistan” Mehran University Research Journal of Engineering and Technology, Pakistan, Vol.23, No. 2, pp.71-78.

  • Takaaki OKUDA, Khan Mohammad BROHI and Saleem Raza SAMO, (Jan – Dec 2003): “Applied General Equilibrium Analysis on Effects of Motorway Network which Connects Local Cities in Japan” Quid-e-Awam University Research Journal of Engineering, Science and Technology, Pakistan, Pakistan, Vol. 3, No.1 & 2, pp 11-20

  • Takaaki OKUDA Samo S.R and BROHI K. M, (Jan – Dec 2002), “Economic and Environmental Impacts Assessment of New Road Transport Network in Pakistan”, Quid-e-Awam University Research Journal of Engineering, Science and Technology, Pakistan Vol. 3, No.1 & 2, pp 11-18

  • BROHI Khan Mohammad, Saleem Raza Samo and M. Anwar Akhund (Jan – Dec 2002): “An Input-Output Analysis for CO2 Emission Reduction Plan in Metropolises of developing Countries” (Case Study of Karachi) Quid-e-Awam University Research Journal of Engineering, Science and Technology, Pakistan Vol. 2, No.1 & 2, pp 35-38.

   
For suggestions and comments: [email protected]